JE Series Specifications OPERATOR INTERFACE Status Annunciators: Red-To-Green LED for relay status indication Adjustments: Integral potentiometers & switches; Setpoint and Deadband tuning; Setpoint Hi/Lo selection switch; Excitation voltage adjustment FUNCTIONAL PARAMETERS Amplifier Linearity: Better Than Or Equal To 0.1% Full Scale (FS) Measurement Response Rate: 100ms typical Span Range @ Full Scale: Factory set; Select 0 To .4 mV/V (minimum); 0 To 1 V/V (maximum) Setpoint Range: 0-100% of Span Range; 12-Turn potentiometer Deadband Range: 0.25%-100% of Span Range; 12-Turn potentiometer Relay Action: Failsafe Mode (Standard); Relay normally energized; De-energizes at setpoint or with loss of power; Reverse action available (Option) Bridge Excitation Voltage: Field adjustable: 4-12 VDC Excitation Current Rating: 40 mA maximum load Excitation Stability: .005%/°F (.01%/°C) Common Mode Rejection: 100dB (minimum) Input Impedance: 200Kohms (minimum) Power (Standard): 115 VAC ±10% @ 50/60Hz; 2.5W (maximum) Power (Options): 230 VAC ±10% @ 50/60Hz; 2.5W (maximum) 12 VDC ± 5% 125 mA maximum; or 12 VDC ± 10% 2.5 W maximum ENVIRONMENTAL Operating Temperature Range: -10° To +60 °C / 14° F To 140°F Storage Temperature Range: -20° To +70° C / -4° F To 158° F Temperature Stability: Better Than 0.02% of Span/°C Humidity Range: 0 To 95% RH; Non-condensing Enclosure Construction: High impact polycarbonate; 11-pin plug base Enclosure Dimensions: 2.75” high X 2.38” wide X 1.75” deep Weight: > 1 lbs. (0.5 kg) Warranty: One year; Limited OPTIONS Mounting: 11-pin sockets, DIN or surface mount; Aluminum DIN rail; Plastic Snap Track; NEMA 4/4X enclosures; Explosion- proof enclosures ; D C power 106