N Series Specifications NA2 Cable Fittings: 4 Nylon cable strain relief’s for load cell cable O.D. of 0.100” (2.5 mm) to 0.275” (7.0 mm) 1 Nylon cable strain relief for instrumentation cable O.D. of 0.100” (2.5 mm) to 0.275” (7.0 mm) Connectors: WAGO 256-4XX; 14 AWG maximum wire size; Screw clamping; 45° interface Trimming: Discrete channel signal trimming using 2.7K ohm isolation resistors with 2.7K ohm limiting resistors Potentiometers: 100K ohm; 25-Turn cermet Enclosure: Reinforced Fiberglass; NEMA 4/4X; Wash down Circuit board: 4.0” x 3.0” (101.6 mm X 76.2 mm); anti-fungal coating Options: 6-conductor cable; Desiccant packs; Replacement PCBA; Cable fittings NB3 Cable Fittings: 4 Nylon cable strain relief’s for load cell cable O.D. of 0.172” (4.4 mm) to 0.315” (8.0 mm) 1 Nylon cable strain relief’s for instrumentation cable O.D. of 0.172” (4.4 mm) to 0.315” (8.0 mm) Connectors: WAGO 256-4XX; 14 AWG maximum wire size; Screw clamping; 45° interface Trimming: Discrete channel signal trimming using 2.7K ohm isolation resistors with 2.7K ohm limiting resistors Potentiometers: 100K ohm; 25-Turn cermet Enclosure: Stainless steel; NEMA 4/4X; 40 psi wash down Circuit board: 4.0” x 3.0” (101.6 mm X 76.2 mm); anti-fungal coating Options: 6-conductor cable; Desiccant packs; Replacement PCBA; Cable fittings 94