ML Series Specifications ML Series Dimensions Capacity (LBS) H1 H2 H3 D1 D2 D3 L1 L2 T Conduit Adapter Deflect Weight DIMENSIONS (INCHES) 1K, 2.5K, 5K, 10K 0.75 0.38 1.35 2.80 0.40 3.50 4.00 3.25 3/8-16 UNC-2B Strain Relief 0.10” 3.0 LBS 15K 0.75 0.63 1.60 2.80 0.40 3.50 4.00 3.25 3/8-16 UNC-2B Strain Relief 0.10” 4.0 LBS 20K, 25K, 35K, 50K 1.30 0.75 2.48 5.30 0.63 6.00 7.00 5.50 1/2-13 UNC-2B 1/2-14 NPT 0.10” 18.0 LBS 60K, 75K, 100K 1.30 1.00 2.5 6.00 0.81 7.00 8.00 6.50 3/4-16 UNC-2B 1/2-14 NPT 0.10” 27.5 LBS PERFORMANCE Rated Capacities (1) (lbs.) 1K, 2.5K, 5K, 10K, 15K, 20K, 25K, 35K, 50K, 60K, 75K, 100K, 150K, 200K, 250K, 300K, 400K, 450K Rated Output (FSO) 3 mV/V Output Tolerance ± 0.1 % R.O. Combined Error Band ≤ 0.05 % FSO Non-Linearity ≤ 0.05 % FSO Hysteresis ≤ 0.05 % FSO Non-Repeatability ≤ 0.05 % of load Zero balance ± 1.0 % FSO Creep (20 Minutes) 0.03% of Load (1) (“K”=Thousand) MECHANICAL Material 17-4ph Stainless Steel Finish Bead Blasted Mount Material Stainless Steel (capacities up to 100K) Epoxy Painted Steel (capacities 150K and over) Mount Finish Natural Safe overload Compression 150 % FSO Side Load 100% FSO Ultimate overload Compression 300% FSO Side Load: 200% FSO Deflection See Dimensions Page Weight See Dimensions Page ELECTRICAL Input Impedance 350 ±3 ohms (nominal) Output Impedance 350 ±3 ohms (nominal) Insulation Resistance >5000 Megohms @ 50VDC Excitation Voltage 10 V AC/DC (15 V maximum) Cable Color Code + Excitation (Red) - Excitation (Black) + Signal (Green) - Signal (White) Shield (Natural) Cable Type 4-conductor, 20 AWG, PVC Jacket, Tinned Copper Braid, Diameter: 0.290” Cable Length See Dimensions Table Cable Termination Finished Conductors Cable Seal Conduit Adapter; See Table ENVIRONMENTAL Temperature, Operating -4 to +140 °F (-20 to +60°C) Temperature, Compensated 14 to +104 °F (-10 to +40°C) Temperature, Storage -40 to +170 °F (-40 to +77°C) Temperature Effects Zero < 0.0015% FSO/°F < 0.0026% FSO/°C Temperature Effects Output < 0.0008% of Rdg./°F < 0.0014% Rdg./°C Sealing IP67; Multi-redundant; Limited Immer- sion Tolerance FM Approval Intrinsically Safe: Non-Incendive: Class I, II, III; Div.1 Groups A-G Class 1; Div.2 Groups A-D 74