MBse Series Specifications MBse Series Dimensions Capacity (LBS) Deflect Weight DIMENSIONS (INCHES) 25, 50 0.008” 3.0 LBS 75, 100, 150 0.011” 3.0 LBS 250 0.016” 3.0 LBS 500 0.025” 3.0 LBS PERFORMANCE Rated Capacities (lbs.) 50, 100, 150, 250, 500 Rated Output (FSO) 3 mV/V Output Tolerance ±0.25 % R.O. Combined Error Band ≤ 0.03 % FSO Non-Linearity ≤ 0.03 % FSO Hysteresis ≤ 0.02 % FSO (VB1) ≤ 0.05 % FSO (VB3) Non-Repeatability ≤ 0.01 % FSO Zero Balance ± 1.0 % FSO Creep (20 Minutes) 0.03 % of Load MECHANICAL Load Cell Material Alloy Tool Steel (MBse1) 17-4 Stainless Steel (MBse3) Load Cell Finish Electroless Nickel (MBse1) Bead Blasted (MBse3) Mount Material Steel (MBse1) Stainless Steel (MBse3) Mount Finish Zinc Plated (MBse1) Natural (MBse3) Safe Overload Compression: 150% FSO Side Load: 30% Ultimate Overload Compression: 300% FSO Side Load: 50% Deflection See Dimensions Page Weight See Dimensions Page ELECTRICAL Input Impedance 415 ± 35 ohms (MBse1) 350 ± 50 ohms (MBse3) Output Inpedance 352 ± 3 ohms Insulation Resistance >5000 Megohms @ 50 VDC Excitation Voltage 10 V AC/DC (15 V maximum) Cable Color Code + Excitation (red) - Excitation (black) + Signal (green) - Signal (white) Shield (natural) Cable Type 4-conductor, 22 AWG, Polyurethane jacket, Tinned Copper Braid, Diameter: 0.200” (MBse1) 0.220 (MBse3) Cable Length See Dimensions Table Cable Termination Finished Conductors Cable Seal Epoxy (MBse1), Compression Gland Fit- ting (MBse3) ENVIRONMENTAL Temperature, Operating 0 to +150 °F (-18 to +65°C) Temperature, Compensated 14 to +104 °F (-10 to +40°C) Temperature, Storage -60 to +185 °F (-50 to +85°C) Temperature Effects Zero < 0.015% FSO/°F < 0.0026% FSO/°C Temperature Effects Output < 0.0008% of Rdg./°F < 0.0014% Rdg./°C Sealing Rating IP65; Multi-redundant; Low Pressure Re- sistant (MBse1), IP67; Multi-redundant; Limited Immersion Tolerance (MBse3) 62