UA Series Specifications Capacity (K LBS) H L1 L2 L3 L4 L5 L6 D1 D2 R Deflect Weight DIMENSIONS (INCHES) 3 1.44 7.00 5.25 0.88 2.56 2.31 0.36 0.625 2.00 0.50 0.005” NOM 1.3 LBS 4 1.44 7.00 5.25 0.88 2.56 2.31 0.36 0.625 2.00 0.50 0.005” NOM 1.3 LBS 5 1.44 7.00 5.25 0.88 2.63 2.25 0.36 0.625 2.00 0.50 0.005” NOM 1.3 LBS 6 1.44 7.00 5.25 0.88 2.63 2.25 0.36 0.625 2.00 0.50 0.005” NOM 1.3 LBS 10 1.44 9.25 6.75 1.25 3.06 2.63 1.06 1.000 2.00 0.50 0.005” NOM 2.0 LBS 20 1.44 9.25 6.75 1.25 3.00 2.69 1.06 1.000 2.00 0.50 0.005” NOM 5.5 LBS 25 1.44 9.25 6.75 1.25 2.94 2.75 1.06 1.000 2.00 0.50 0.005” NOM 5.5 LBS 50 1.50 12.00 8.50 1.75 3.06 3.94 1.56 1.375 2.88 1.00 0.005” NOM 10.5 LBS 60 1.50 12.00 8.50 1.75 3.06 3.88 1.56 1.375 2.88 1.00 0.005” NOM 10.7 LBS 75 1.81 12.88 9.00 1.94 3.06 4.38 1.56 1.563 3.25 1.00 0.005” NOM 15.0 LBS 100 2.13 14.19 9.81 2.19 3.50 4.63 1.69 1.813 3.50 1.00 0.005” NOM 19.2 LBS 125 2.25 15.25 10.50 2.38 3.93 5.13 1.44 2.000 3.88 1.00 0.005” NOM 24.0 LBS 150 2.50 15.88 10.75 2.56 3.38 5.31 1.06 2.250 4.13 1.00 0.005” NOM 30.0 LBS 200 2.75 17.25 11.63 2.81 3.44 5.94 1.25 2.500 4.75 1.00 0.005” NOM 41.0 LBS 250 3.00 18.88 12.75 3.06 4.50 5.75 1.50 2.750 5.25 1.00 0.005” NOM 54.0 LBS 300 3.25 20.63 14.25 3.19 5.00 6.50 2.75 3.000 5.75 1.00 0.005” NOM 69.0 LBS 400 4.75 23.75 15.25 4.25 4.50 7.00 3.75 3.250 6.38 1.50 0.005” NOM 107.0 LBS PERFORMANCE Rated capacities (1) (lbs.) 3K, 4K, 5K, 6K, 10K, 20K, 25K, 50K, 60K, 75K, 100K, 125K, 150K, 200K, 250K, 300K, 400K Rated output (FSO) 2 mV/V Output Tolerance Nominal Combined Error Band ≤ 0.25 % FSO Non-Linearity ≤ 0.25 % FSO Hysteresis ≤ 0.25 % FSO Non-Repeatability ≤ 0.2 % FSO Side Load Rejection Ratio 500:1 Zero balance ± 2 % FSO Creep (20 minutes) 0.05 % of Load (1) (“K”= thousand) MECHANICAL Material Alloy Tool Steel (UA1) 17-4ph Stainless Steel (UA3) Finish Natural Safe overload Compression 150 % FSO Tension 150 % FSO Side Load 100% FSO Ultimate overload Compression 300% FSO Tension 300% FSO Side Load: 200% FSO Deflection See Dimensions Table Weight See Dimensions Table ELECTRICAL Input Impedance 350 (nominal) Output Impedance 350 (nominal) Insulation Resistance >5000 Megohms @ 50VDC Excitation Voltage 10 V AC/DC (15 V maximum) Connector Pin Functions + Excitation (A) - Excitation (D) + (Optional) Remote Sense (E) - (Optional) Remote Sense (F) + Signal (B) - Signal (C) Shield (G) Cable Color Code + Excitation (red) - Excitation (black) + Signal (green) - Signal (white) Shield (natural) Cable Type 4-conductor, 22 AWG, Polyurethane Jacket, Tinned Copper Braid, Diameter: 0.220” Cable Length See Dimensions Table Cable Termination Finished Conductors Cable Seal Compression Gland Fitting ENVIRONMENTAL Temperature, Operating -65 to +250 °F (-54 to +120°C) Temperature, Compensated 15 to +115 °F (-9 to +46°C) Temperature, Storage -65 to +300 °F (-54 to +149°C) Temperature Effects Zero < 0.005% FSO/°F / < 0.009% FSO/°C Temperature Effects Output < 0.008% of Rdg./°F < 0.014% Rdg./°C Sealing IP67; Multi-redundant; Limited Immersion Tolerance The temperature ratings provided do not include the companion cable/connector assembly. If PUR or PVC cable is employed, the maximum operating temperature is 180°F (82°C) UA Series Dimensions 80