PF Series Specifications PF Series Dimensions 8 PERFORMANCE Rated capacities (1) (lbs.) 100, 200, 300, 400, 500, 600, 1K, 2K, 3K, 4K, 5K Rated Output (FSO) 2 mV/V Output Tolerance ± 0.25 % R.O. Combined Error Band ≤ 0.10 % FSO Non-Linearity ≤ 0.10 % FSO Hysteresis ≤ 0.10 % FSO Non-Repeatability ≤ 0.05 % of load Zero balance ± 1.0 % FSO Creep (20 Minutes) 0.05% of Load (1) (“K”= thousand) MECHANICAL Material Stainless Steel Finish Natural Safe overload Compression 1000% FSO Side Load 30% FSO Ultimate overload Compression 1000% FSO Side Load: 50% FSO Deflection See Dimensions Page Weight See Dimensions Page Mounting Bolt Torque ELECTRICAL Input Impedance 400 ohms (nominal) Output Impedance 350 ohms (nominal) Insulation Resistance >5000 Megohms @ 50VDC Excitation Voltage 10 V AC/DC (15 V maximum) Cable Color Code + Excitation (red) - Excitation (black) + Signal (green) - Signal (white) Shield (natural) Cable Type 4-conductor, 22 AWG, Polyurethane jacket, Tinned Copper Braid, Diameter: 0.190” Cable Length See Dimensions Table Cable Termination Finished Conductors Cable Seal Compression Gland Fitting ENVIRONMENTAL Temperature, Operating -20 to +180 °F (-29 to +82°C) Temperature, Compensated 40 to +140 °F (-10 to +60°C) Temperature, Storage -40 to +200 °F (-40 to +93°C) Temperature Effects Zero < 0.009% FSO/°F < 0.016% FSO/°C Temperature Effects Output < 0.005% of Rdg./°F < 0.009% Rdg./°C Sealing IP67; Multi-redundant; Limited Immer- sion Tolerance Capacity (LB) Deflect Weight DIMENSIONS (INCHES) 100, 200, 300, 400 0.007” 1.0 LB 500, 600, 1K, 2K 0.006” 1.0 LB 3K, 4K, 5K 0.004” 1.0 LB